Multiplex Royal Evo
R/C Transmitter Perfection Defined!

Click HERE for T&G Hobbies
 

Data Manager Software and Royal Evo firmware update

Royal Evo Manual (in PDF Format)

 

Multiplex first introduced the world to computer radios with the first ROYAL MC radio. Now Multiplex, "KICKS it up a NOTCH" with the introduction of R/C transmitter perfection, The ROYAL EVO!

This new addition follows the design principle of 'form follows function', giving you a superb elegant case packed with ground breaking new features and operations!

 
The basis of a new design concept!
  • Crystal or synthesizer (Depending on Royal model)
  • Hand-held or tray mounted
  • Precision ball bearing stick units in swiveling mounts
  • Ergonomically molded stick tops
  • Direct menu control system
  • Dual digi-adjustors
  • Large folding graphics screen
  • Cruciform digital trims
  • Synthesizer version available, so no more crystals!
The Royal EVO also has to offer...
  • 7, 9 or 12 channels
  • 4 flight modes per memory
  • Up to 36 model memories
  • 3 timers
  • Up to 14 mixers, 3 of them are pre-defined but changeable by the end user!
  • Freely selectable transmitter modes
  • Quick setup using 'Types'
  • Selective trainer mode, teacher or pupil, with Futaba and JR modes available
  • Comprehensive software for fixed wing and helicopters
  • PC connection and upgradeable

Featuring:

Ultimate Controls
The control stick units feature precision ball races with selectable ratchet/ self-centering action. The units can be swiveled through 15 degrees allowing thumbs to follow their natural movement.
 

Sticks
3 sizes of tops are included in the set, all-variable in length. Stick top switches can be fitted but the used featuring integral push button and rocker switch. One can be fitted per transmitter and no soldering required to install!
 

For adjusting mixers and exponential controls, the Royal EVO features Multiplex's new 3-D Digi adjustors! The Digi Adjustors are used when programming the radio, and they can also be used to adjust the mixing in-flight. If the 3-D-adjustors are unlocked during flight, you can adjust the mixer values in-flight until they are the way you want them to be. Without landing - changing value -starting - landing - changing value - starting.

The 3-D Digi adjustors are positioned symmetrically and within easy reach at the corners of the case. 3-D digi-adjustor, momentary and positionable switches are all freely assignable, they can be used as functions, adjustors or direct control switches.

QS Quick Select
The easy choice method - When you are assigning Tx controls and switches, all you need to do is to move the desired channel and the Tx assigns the channel. The QS is also useful when setting up mixers. If the setup menu is open, a brief movement of the Tx control activates the value you wish to change.

Digital Cruciform Trim Assemblies
On screen display of digital trim positions with ergonomic efficiency. Both axes can be adjusted from the same group of buttons.
 

Adjustable screen
The Royal EVO features a large graphic display with an 8448 dot high contrast image. It is UV stable, anti reflective and can be adjusted to 20 degrees for ease of viewing. The display has modes for in-flight, scanner and channel selection depending on Royal model.
 


 

Button Pad
11 direct menu select switches allow fast selection of the Tx functions and can be used as an alternative to the digi-adjustor.

The Power management details
Battery management: you can see the voltage, also the capacity of your battery! The only thing you have to do is to set a correct value (after a few cycles of the battery) of your battery pack, for example 1500 mAh after the battery is charged. Or you measure the correct capacity value. Then the TX measures the loss of capacity during programming or flying and gives you the remaining operating time in the currently used mode! (Like a board computer in a car that shows you the remaining miles you can drive if you keep driving with the speed you are driving right now). It also calculates the capacity loss when the TX is lying in your cellar for a few days. (Subtracts 1,5% of the capacity per day = self-discharge).

PC Data Transfer
Using an EVO Data cable, you can connect the Royal EVO transmitter to your Windows PC. You can transfer model memories to and from your Royal EVO Transmitter. You can also install updates to the Transmitter software, ensuring your Royal EVO will always be cutting edge.

 

What else will the Royal EVO do?

Features in detail