34 Ford

34-ford.jpg

BODY

FRAME AND SUSPENSION

OPTIONS

ROLLING CHASSIS

RC OPTIONS

btn-34ford.gif

BODY $7,495.00

Hand-crafted fiberglass laminate featuring: hand laid layers of fiberglass, durable gelcoat surface and an inner core, providing high strength and superior surface quality. All high stress areas are reinforced with heavy woven roving [woven strands fiberglass at 90 degrees, used in most boat manufacturing] providing the strongest most durable body in the industry.

41fordphoto1.gifNo fiberglassing required: all inner components, floor, firewall, trunk liners and door liners are pre-glassed and bonded in place. Doors and trunk liners are bonded together in the molds with custom fixtures for precise and accurate placement.

Door frames and dash are supported with hardwood and plywood inner structure for stability and solid mounting of hinges and latches.

Top is chopped 3 " from original height.

Plywood package shelf and rear window frame are installed.

41fordphoto2.gifTrunk hinge pivots are steel reinforced, precisely located and fiberglassed in place.

Doors and trunk lid come hinged to the body using taped sandwich plates behind inner liners for strength and adjustablity.

Doors are latched with bear claw rotary safety latches and are latched in the front and hinged in the rear [suicide doors].

We mold our own bodies, to exact outer dimensions using original specifications, utilizing our 30 years experience in the fiberglass industry. Bodies are so well aligned that we remove all flash lines [lines formed from seams in multiple piece molds] from the gelcoat surface. All fiberglass components go through our 12 point total cure process, insuring no post cure, and are inspected at each step of production. Every component is machined buffed to insure that the surface is even, flat and shiny.

34new1b.jpg 34new2b.jpg

These features combine to give our customers the highest quality body and ease of assembly.


Body

 
Including main body with 3" chop doors, doors hung and latched with window tracks installed, trunk lid hung, floor, tunnel cover, dashboard, wiper motor cover, rear window garnish mouldings and firewall.

 

Body Options

Fender Running Board Fender Running Board Package
Including front fenders, rear fenders, running boards, rear panel and front splash panels.
$1,495.00
  Rear Roll Pan
$145.00 

  Inside Steel Package
Front and rear hoops with steering column support
$395.00 
tubs.gif

Pro-Street Wheel Well Tubs
Installed
$395.00


 

Fiberglass Three Piece Hood
$395.00

  Steel Hood
Style and pricing upon request

34-grill-shell.gif Grill Shell only
$195.00
34_grill_with_teeth.gif Grill shell with SS teeth
$795.00

back to top

FRAME and SUSPENSION

Stock Frame

$3,995.00
  • frame_a.jpgFrame rails are reproduced from original design and mig and tig welded for superior strength and durability
  • 112" wheel base
  • Main rails fabricated from 10 gauge cold finished mild steel
  • Cross section of main rail at it’s tallest point is 6" x 1 7/8"
  • All frame rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail
  • All holes in frame rails are precisely located and predrilled with a custom fixture
  • Frame is cross-braced with K member formed from 10 gauge mild steel 
  • K member has access for ease of routing exhaust, brake lines and fuel lines
  • Frame rails are boxed for added strength and appearance
  • All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly
  • Front cross member is setup for stock or tubular Mustang II front suspension and is formed from 3/16" cold finished mild steel with all mounting point for upper and lower control arms and rack and pinion steering precisely located with custom fixtures
  • Front strut mounting brackets are made from 5/16" cold finished mild steel with a1/4" gusset for added strength (not used with tubular front control arms)
  • Rear cross member is constructed from 2" x 2" square tubing with 1 ¼" diameter threaded bar stock for mounting of coilover shocks

Pro-Street Frame

$4,495.00
  • pro_street_frame_a.jpgNarrowed rear frame rails ready to accept 5 link rear suspension and tubed body. 

Triangulated Rear Suspension

$445.00
  • tri-sus.gifTriangulated four link arms setup for coilover shocks.
  • Each four link arm has a single adjuster for fine tuning rear end location and adjusting of pinion angle.
  • Link arms are made from 1" diameter .156" heavy wall D.O.M. tubing with urethane bushings and an inner sleeve to accept 9/16" bolts.
  • All mounting brackets for attachment to frame and rear end housing are provided.

Pro-Street Rear Suspension

$545.00
  • pro-rear.gifParallel four link with the addition of a panhard bar 

back to top

OPTIONS

shocks.gif Rear Coil-Over Shocks
Fully adjustable shocks with matching spring rates.
$475.00
motor_mounts.jpg Motor Mounts
Steel mounts that weld in place and are matched to your motor style and type.
$150.00

brake-pedal.gif

Brake Pedal and Master Cylinder Bracket
Attaches to frame member and uses a 3/4" oil impregnated bronze bushing as a pivot for the pedal arm. A 3/8" self aligning rod end is used to actuate the master cylinder. 
$225.00

Master Cylinder
Add $85.00

Power Booster
Add $125.00 

Clutch Pedal Assembly                Add $195.00

 

34-glass.gif

Window Glass
Pre-Cut laminated safety glass for doors, windshield and rear windows. Available in clear and gray tint.

$395.00


power_windows_a.jpg

Power Window Regulators
Complete system for electronically raising and lowering door glass includes wiring and switches.
$425.00

Installed with glass purchase add $295.00 

34-manual-window.gif Manual Window Regulators
Hand operated crank style for manually raising and lowering door glass
$525.00

34-handels.gif

Outside Door Handles

Locking
$89.00

Non-Locking
$69.00 

34-spreader-bar.gif

Rear Spreader Bar
$150.00 


34-bumper.gif

Front & Rear Bumpers

Chrome
$425.00

Stainless Steel
$485.00 

34_bumper_brackets.gif

Bumper Brackets
$275.00 


34-headlights.gif

Headlights

Original
$325.00

7" Chrome
$95.00 

34-stands.gif

Chrome Headlight Stands 
$69.95 


34-stand-gaskets.gif

Headlight Stand Gaskets
$9.95 

34-tail.gif

Tail Lights
Original style tail light.
$79.00 

 


34-tail-stands.gif

Tail Light Pedestal

Chrome
$99.00

Black
$79.00

Black Chopped
$99.00 

 

38-39 Ford Tail Lights
$75.00/pair 

38-39 Tail Light Gaskets
$9.00 


34-gas-tank.gif

Gas Tank

Poly
$340.00

34-steel-tank.gif

Gas Tank

Steel
$320.00

Stainless Steel
$550.00 

 


wiring_harness.jpg

Wiring Harness
American autowire series 22, including fan and horn relays, ignition, headlight and dimmer switch, mega fuse, labeled and color coded wiring, and much more.
$599.00

radiator_a.jpg

Radiator

pricing upon request.

 

 

 

All prices subject to change without notice.

 


 

 

 

   

back to top

Rolling Chassis

Following equipment installed on our frame:

  • 34_rolling__achassis.jpgFrame
  • Rear link arm set up
  • Rear coil over shocks
  • Front upper and lower tubular control arms
  • Manual rack and pinion steering with tie rod ends and bushings
  • Mustang II spindles and brake brackets
  • Mustang ll 11"5 lug rotors, bearings seals
  • Front calipers and pads
  • Front coil over shocks
  • 9" Ford rear housing with axles, bearings and seals
  • Non POSI 9" center section
  • 11" rear disc brakes and loaded backing plates
  • Brake pedal assembly and master cylinder

*Above parts only (not installed), deduct $500.00

Stock Frame

$8,995.00

Pro Street Frame

$9,495.00

Rolling Chassis Options / Upgrades

Black Powder Coating on Frame and Rear Housing - Only available with rolling chassis or customer pickup add $850.00
POSI Rear add $500.00
Rubber Brake Hoses, Steel Brake Lines, Brake Brackets, Line Clamps,   
and Adjustable Proportioning Valves Installed  add $425.00
   

Power Brakes

add $125.00

Wilwood Brakes

wilwood disc brake (1).jpg

$1195.00
Straight Front Axle (below)

straight_axle_a.jpg

Pricing upon request

back to top

** Custom Options Also Available **

34-turnkey.gif

Turnkeys: Cars that are completely built to your specifications, pricing upon request.

** ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE **


btn-34ford.gif

 Antique & Collectible Autos, Inc.  |  35 Dole St.  |  Buffalo, NY 14210  |  1.800.245.1310